Спек лист к этой знаменитой импрезе: 800hp WRX STi

Mod list:

Engine and Power stuff:
-Locally built 2.6L
-Darton Sleeves
-102.5mm CP pistons "8.5:1"
-Cobb Rods
-cosworth rod and main bearings
-factory crank
-gutted factory oil pump
-engine deck has been stainless steel O ringed to work with a SCE copper head gasket.
-DPR stage 5 cams
-Heads have seen a lot of time on the flow bench (313 CFM @ .45 lift)
-2.5 mm over sized Ferrara intake valves
-1.5mm over sized exhaust valves
-spark plug seats have been machined down so a standard 3/4" reach NGK plug
-Ported TGV
-Cosworth 14mm head studs
-14mm studs that hold the block halves together
-Custom built 4" turbo back exhaust
-custom built dual scroll up-pipe
-Garrett GT4294R
-Twin Tial 44mm wastegate
-Tial BOV
-modified twin scroll APS exhaust manifold
-Custom built large plenum intake manifold w/velocity stacks and long tapered runners.
-Infinity Q45 90mm throttle body
-Three intake walbro 255's (each 255 has a -6AN line that is fed to a fuel block and them a -10AN fuel line is ran to the engine bay were it feeds two -10AN fuel rails
-1600cc top feed low impedance fuel injectors
-10AN Aeromotive FPR
-Hydra EMS


Tranny power delivery:
-ATS triple carbon clutch
-As for the rest of the tranny and the power delivery items, They are stock because he is curious as to see at what power level these items start breaking.


Suspension Chassis, braking:
-Tein Flex Coilovers
-Cusco rear sway bar
-Cusco front strut tower brace
-Carbon Cusco rear strut tower brace
-Custom cromolly cage to be installed in the short future
-factory STi braking system.


Interior:
- As little as possible
- Sparco Evo L seats
- Defi gauge's
- Radio??? Radio who needs a stinkin radio


Exterior:
-Street--- Volk CE28Ns w/ 255/35-18
-Track--- PRODRIVE GC06H 17X8 w/ 275/40-17 mickey thompson ET streets.
-Wingless
-WRX hood scoop